Pressure Washer
Overview of Pressure Washer Repair Services
Washing Machine Service provides comprehensive repair and maintenance for all types of pressure washers in Nairobi. Services include diagnostic testing, component replacement, leak repairs, pump servicing, motor repairs, hose and nozzle replacements, trigger gun repairs, pressure regulator adjustments, and general maintenance. Technicians are equipped to handle electric, petrol, and diesel pressure washers from all major brands available in Kenya.

The company offers on-site repairs for commercial and residential pressure washers. Mobile repair units carry common spare parts to minimize downtime. For complex issues requiring specialized parts, technicians can source components within 24-48 hours. All repairs come with a 3-month warranty on labor and parts, ensuring long-term reliability.
Common Pressure Washer Problems and Associated Repair Costs
Pressure washers experience a range of issues due to high-pressure operation, water quality, and intensive use. Below are the most frequent problems encountered by Washing Machine Service technicians, along with typical repair solutions and cost ranges.
Engine Starting Issues (Petrol/Diesel Models)
Petrol and diesel pressure washers often fail to start due to fuel system problems, spark plug issues, or engine faults. Common causes include stale fuel, clogged carburetors, faulty spark plugs, weak batteries in electric start models, or compression loss in older engines.
- Fuel System Cleaning: Removing old fuel, cleaning the carburetor, and replacing fuel filters. Cost: KES 2,500 - 4,000.
- Spark Plug Replacement: Replacing worn or fouled spark plugs. Cost: KES 800 - 1,500 per plug.
- Carburetor Overhaul: Disassembling, cleaning, and reassembling the carburetor with new gaskets. Cost: KES 3,500 - 6,000.
- Battery Replacement (Electric Start): New battery installation for models with electric start. Cost: KES 4,000 - 7,000.
- Compression Test: Diagnosing engine health; low compression may require engine rebuild or replacement. Cost: KES 1,500 - 2,500 for testing only.
- Engine Rebuild: Overhauling the engine with new pistons, rings, and bearings. Cost: KES 15,000 - 25,000 depending on engine size.
- Full Engine Replacement: Swapping out a seized or damaged engine for a new or reconditioned unit. Cost: KES 20,000 - 40,000 depending on horsepower.
Electric Motor Failures
Electric pressure washers rely on motors to drive the pump. Motor failures can result from power surges, overheating, water ingress, or bearing wear. Symptoms include the motor not starting, burning smell, excessive noise, or tripping circuit breakers.
- Motor Brush Replacement: Replacing worn carbon brushes in brushed motors. Cost: KES 2,000 - 4,000.
- Bearing Replacement: Replacing worn motor bearings causing noise or seizure. Cost: KES 3,000 - 6,000.
- Motor Rewinding: Rewinding burnt-out motor windings for induction motors. Cost: KES 8,000 - 12,000.
- Full Motor Replacement: Installing a new motor matched to the pump specifications. Cost: KES 10,000 - 20,000 depending on motor power.
- Capacitor Replacement: Replacing start or run capacitors in single-phase motors. Cost: KES 1,500 - 3,000.
- Thermal Overload Reset: Resetting or replacing thermal overload protectors. Cost: KES 1,000 - 2,500.
Pump Malfunctions
The pump is the heart of a pressure washer, pressuring water for cleaning. Pump issues manifest as low pressure, no pressure, pulsating pressure, or water leaks. Common pump types include axial cam pumps, wobble pumps, and triplex plunger pumps.
- Pump Seal Replacement: Replacing worn or damaged seals causing leaks or pressure loss. Cost: KES 2,000 - 5,000.
- Plunger/ Piston Replacement: Replacing worn plungers or pistons in triplex pumps. Cost: KES 4,000 - 8,000 per set.
- Valve Replacement: Replacing inlet or outlet valves in the pump head. Cost: KES 1,500 - 4,000 per valve.
- Crankshaft Replacement: Replacing a worn or broken crankshaft in axial cam pumps. Cost: KES 5,000 - 10,000.
- Pump Head Rebuild: Full rebuild of the pump with new seals, valves, and bearings. Cost: KES 8,000 - 15,000.
- Complete Pump Replacement: Installing a new pump matched to the pressure washer's PSI and GPM ratings. Cost: KES 12,000 - 30,000 depending on pump type and brand.
- Pressure Adjustment: Calibrating the pressure regulator or unloader valve. Cost: KES 1,500 - 3,000.
Water Flow and Pressure Issues
Low or no pressure can stem from blockages, pump wear, or system leaks. Technicians systematically check the water inlet, pump, hoses, and nozzles to identify the root cause.
- Inlet Filter Cleaning: Removing debris from the water inlet filter. Cost: KES 500 - 1,000.
- Hose Inspection and Replacement: Checking for kinks, cracks, or blockages in high-pressure hoses. Cost: KES 3,000 - 8,000 for replacement hoses.
- Nozzle Cleaning or Replacement: Removing mineral deposits or replacing worn nozzles. Cost: KES 500 - 2,000 per nozzle.
- Unloader Valve Repair: Repairing or replacing the unloader valve that regulates pressure. Cost: KES 2,000 - 5,000.
- Pressure Regulator Adjustment: Fine-tuning the pressure regulator for consistent output. Cost: KES 1,500 - 3,500.
- Bypass Valve Service: Servicing the bypass valve to prevent pressure buildup when the trigger is released. Cost: KES 2,000 - 4,000.
Leaks and Seal Failures
Pressure washers operate under high pressure, making them prone to leaks at connection points, hoses, pump seals, and fittings. Even small leaks can reduce efficiency and cause water damage.
- Hose Fitting Replacement: Replacing damaged or corroded hose fittings. Cost: KES 800 - 2,000 per fitting.
- Pump Seal Kit Replacement: Installing a complete seal kit for the pump. Cost: KES 3,000 - 7,000.
- O-Ring Replacement: Replacing worn O-rings in connections and pump heads. Cost: KES 300 - 1,000 per ring.
- Water Inlet Valve Replacement: Replacing the valve controlling water flow into the pump. Cost: KES 2,000 - 4,500.
- Drain Plug Replacement: Replacing the drain plug to prevent leaks during storage. Cost: KES 500 - 1,500.
- Leak Detection and Repair: Identifying and fixing leaks in the pressure washer system. Cost: KES 1,500 - 4,000 depending on complexity.
Trigger Gun and Lance Problems
The trigger gun and lance assembly control water flow and pressure at the user end. Issues here can include stuck triggers, broken springs, or damaged lances.
- Trigger Gun Repair: Repairing or replacing the trigger mechanism. Cost: KES 1,500 - 4,000.
- Trigger Spring Replacement: Replacing the spring that returns the trigger to the off position. Cost: KES 500 - 1,500.
- Lance Replacement: Replacing a bent or damaged lance. Cost: KES 2,000 - 5,000.
- Quick-Connect Fitting Repair: Repairing or replacing quick-connect fittings between the gun and hose. Cost: KES 1,000 - 2,500.
- Gun Handle Replacement: Replacing a cracked or broken gun handle. Cost: KES 2,000 - 4,500.
Electrical and Control System Faults
Electric pressure washers and some petrol models feature control systems for start/stop functions, pressure adjustment, and safety features. Faults in these systems can prevent operation or cause unsafe conditions.
- Control Box Repair: Repairing the control box housing switches and indicators. Cost: KES 2,000 - 5,000.
- Switch Replacement: Replacing the on/off switch or pressure switch. Cost: KES 1,000 - 3,000 per switch.
- Wiring Harness Repair: Repairing or replacing damaged wiring. Cost: KES 1,500 - 4,000.
- Fuse Replacement: Replacing blown fuses in the electrical circuit. Cost: KES 300 - 800.
- Solenoid Valve Replacement: Replacing the solenoid controlling water flow in some models. Cost: KES 2,500 - 5,000.
General Maintenance Services
Regular maintenance extends the life of pressure washers and prevents costly breakdowns. Washing Machine Service offers scheduled maintenance packages tailored to usage frequency and model type.
- Basic Service: Includes inspection, filter cleaning, hose check, and nozzle cleaning. Cost: KES 2,000 - 3,500.
- Standard Service: Basic service plus pump oil check, spark plug check (petrol), and pressure test. Cost: KES 3,500 - 5,000.
- Comprehensive Service: Standard service plus carburetor cleaning (petrol), motor inspection (electric), and full system leak check. Cost: KES 5,000 - 8,000.
- Winterization Service: Draining water, adding antifreeze, and storing the unit to prevent freeze damage. Cost: KES 2,500 - 4,000.
- Post-Season Service: Deep cleaning of all components, pump oil change, and replacement of worn parts. Cost: KES 6,000 - 10,000.
- Pump Oil Change: Replacing old pump oil to ensure proper lubrication. Cost: KES 1,000 - 2,000.
- Air Filter Replacement: Replacing the air filter in petrol models. Cost: KES 500 - 1,500.
- Fuel Filter Replacement: Replacing the fuel filter to prevent carburetor clogging. Cost: KES 500 - 1,500.
Pressure Washer Repair and Spare Parts Cost Table
Below is a detailed table of repair service costs and spare parts prices for pressure washers serviced by Washing Machine Service in Nairobi. All prices are approximate and may vary based on the specific model, brand, and market fluctuations. Prices include labor unless otherwise stated.
| Service / Part |
Description |
Estimated Cost (KES) |
Notes |
| Diagnostic Fee |
Full system inspection and fault identification |
1,500 - 2,500 |
Waived if repair is done |
| Call-Out Fee (Nairobi) |
On-site visit charge |
2,000 - 3,000 |
Free for repairs over KES 5,000 |
| Emergency Call-Out |
After-hours or weekend service |
4,000 - 6,000 |
Additional to repair cost |
Engine-Related Services and Parts
| Service / Part |
Description |
Estimated Cost (KES) |
Notes |
| Carburetor Cleaning |
Removal, cleaning, reassembly |
3,500 - 6,000 |
Includes gasket replacement |
| Spark Plug Replacement |
Single spark plug |
800 - 1,500 |
Per plug |
| Air Filter Replacement |
Paper or foam air filter |
500 - 1,500 |
Petrol models |
| Fuel Filter Replacement |
Inline fuel filter |
500 - 1,500 |
Petrol models |
| Oil Change (Engine) |
Engine oil and filter |
2,000 - 3,500 |
4-stroke engines |
| Engine Oil Filter |
Replacement filter |
800 - 1,500 |
4-stroke engines |
| Battery Replacement |
12V battery for electric start |
4,000 - 7,000 |
Depending on capacity |
| Starter Motor Repair |
Starter motor service |
3,000 - 6,000 |
Petrol models |
| Recoil Starter Repair |
Pull-start mechanism repair |
2,000 - 4,000 |
Replacing rope and spring |
| Engine Rebuild Kit |
Pistons, rings, bearings |
10,000 - 18,000 |
Parts only |
| Complete Engine (5-7 HP) |
New or reconditioned |
20,000 - 35,000 |
Depending on brand |
| Complete Engine (10-13 HP) |
New or reconditioned |
35,000 - 50,000 |
Commercial models |
Pump-Related Services and Parts
| Service / Part |
Description |
Estimated Cost (KES) |
Notes |
| Pump Seal Kit |
Full set of seals for pump |
2,000 - 5,000 |
Axial cam pumps |
| Plunger Set |
3-plunger set for triplex pump |
4,000 - 8,000 |
High-pressure pumps |
| Pump Valve Kit |
Inlet and outlet valves |
1,500 - 4,000 |
Per set |
| Crankshaft |
Pump crankshaft |
5,000 - 10,000 |
Axial cam pumps |
| Pump Head |
Complete pump head assembly |
8,000 - 15,000 |
Depending on PSI rating |
| Pump Oil Change |
Pump oil replacement |
1,000 - 2,000 |
Synthetic oil recommended |
| Pump Oil (1L) |
Synthetic pump oil |
1,500 - 2,500 |
Per liter |
| Pressure Regulator |
Adjustable pressure regulator |
3,000 - 6,000 |
Part only |
| Unloader Valve |
Pressure unloader valve |
2,000 - 5,000 |
Part only |
| Complete Pump (2000-2500 PSI) |
New axial cam pump |
12,000 - 20,000 |
Residential models |
| Complete Pump (3000-4000 PSI) |
New triplex pump |
20,000 - 30,000 |
Commercial models |
Hose, Lance, and Nozzle Services and Parts
| Service / Part |
Description |
Estimated Cost (KES) |
Notes |
| High-Pressure Hose (5m) |
Replacement hose |
3,000 - 6,000 |
2000-2500 PSI rated |
| High-Pressure Hose (10m) |
Replacement hose |
5,000 - 9,000 |
2000-2500 PSI rated |
| High-Pressure Hose (15m) |
Replacement hose |
7,000 - 12,000 |
Commercial grade |
| Hose Repair Kit |
Couplings and fittings |
1,000 - 2,500 |
For minor hose damage |
| Trigger Gun |
Complete trigger gun |
2,000 - 5,000 |
Depending on model |
| Trigger Gun Repair |
Trigger mechanism service |
1,500 - 4,000 |
Labor included |
| Lance (Standard) |
Straight lance |
2,000 - 4,000 |
20-40 inches |
| Lance (Adjustable) |
Multi-angle lance |
3,000 - 6,000 |
Variable spray patterns |
| Nozzle Set (5-pack) |
Color-coded nozzles |
1,000 - 2,500 |
0° to 40° patterns |
| Single Nozzle |
Replacement nozzle |
500 - 1,500 |
Per nozzle |
| Quick-Connect Fittings |
Hose to gun connectors |
800 - 2,000 |
Per pair |
Electric Motor Services and Parts
| Service / Part |
Description |
Estimated Cost (KES) |
Notes |
| Motor Brush Replacement |
Carbon brush set |
2,000 - 4,000 |
Brushed motors |
| Motor Bearing Replacement |
Front and rear bearings |
3,000 - 6,000 |
Per motor |
| Motor Capacitor |
Start/run capacitor |
1,500 - 3,000 |
Single-phase motors |
| Motor Rewinding |
Stator rewinding |
8,000 - 12,000 |
Induction motors |
| Thermal Overload Protector |
Overload reset device |
1,000 - 2,500 |
Motor protection |
| Complete Electric Motor (2-3 HP) |
New motor |
10,000 - 18,000 |
Residential models |
| Complete Electric Motor (5-7 HP) |
New motor |
18,000 - 25,000 |
Commercial models |
Maintenance and Miscellaneous Services
| Service / Part |
Description |
Estimated Cost (KES) |
Notes |
| Basic Maintenance |
Filter cleaning, hose check, nozzle cleaning |
2,000 - 3,500 |
Recommended every 50 hours |
| Standard Maintenance |
Basic + pump oil check, spark plug check |
3,500 - 5,000 |
Recommended every 100 hours |
| Comprehensive Maintenance |
Standard + carburetor cleaning, leak check |
5,000 - 8,000 |
Recommended annually |
| Winterization |
Drain water, add antifreeze, storage prep |
2,500 - 4,000 |
Seasonal service |
| Post-Season Service |
Deep clean, pump oil change, worn parts replacement |
6,000 - 10,000 |
End-of-season |
| Frame Repair |
Welding or reinforcing pressure washer frame |
3,000 - 7,000 |
Depending on damage |
| Wheel Replacement |
Replacement wheels for portable models |
1,000 - 2,500 |
Per wheel |
| Handle Repair |
Repair or replace handle assembly |
1,500 - 4,000 |
Depending on model |
Cost Factors for Pressure Washer Repairs
Several factors influence the final cost of pressure washer repair and maintenance. Understanding these can help customers anticipate expenses and make informed decisions.
Type of Pressure Washer
Electric pressure washers generally cost less to repair than petrol or diesel models. Electric units have simpler designs with fewer moving parts, leading to lower labor and part costs. Petrol and diesel pressure washers have engines that require more complex diagnostics and repairs, increasing costs. Commercial-grade pressure washers, whether electric or petrol, typically have higher repair costs due to their robust construction and specialized parts.
Brand and Model
Different brands use proprietary parts and designs, affecting repair costs. High-end brands like Karcher, Nilfisk, or Stihl often have more expensive parts compared to generic or budget brands. However, these brands also tend to have better availability of spare parts in Nairobi, reducing downtime. Less common brands may require parts to be imported, increasing both cost and repair time. Technicians at Washing Machine Service maintain an inventory of common parts for popular brands to minimize delays.
Severity of the Fault
Minor issues such as clogged nozzles, dirty filters, or loose fittings can be resolved quickly and inexpensively. These typically fall within the KES 500 - 3,000 range. Moderate issues like pump seal replacements, motor brush changes, or carburetor cleaning usually cost between KES 3,000 - 8,000. Major repairs, including engine rebuilds, pump replacements, or motor rewinding, can exceed KES 10,000, especially for commercial units.
Labor Costs
Labor costs vary based on the complexity of the repair and the time required. Simple tasks like nozzle replacement or filter cleaning may take 15-30 minutes, while pump rebuilds or engine overhauls can take several hours. Washing Machine Service charges labor based on the type of repair rather than hourly rates, providing upfront quotes to customers. This approach ensures transparency and prevents unexpected costs.
Availability of Spare Parts
The cost of spare parts can fluctuate based on availability and import status. Locally available parts for common brands are generally cheaper and can be replaced immediately. Imported parts, especially for high-end or less common models, may take 1-2 weeks to arrive and come at a premium. Washing Machine Service works with trusted suppliers to source parts efficiently, keeping customers informed throughout the process.
Age and Condition of the Pressure Washer
Older pressure washers may require more frequent repairs due to wear and tear on components like seals, bearings, and hoses. In some cases, the cost of repairing an old unit may approach or exceed the cost of a new pressure washer. Technicians at Washing Machine Service provide honest assessments to help customers decide whether repair or replacement is the more economical choice. For units over 5-7 years old, a cost-benefit analysis is often recommended.
Service Packages and Discounts
Washing Machine Service offers service packages and discounts to provide value to customers, especially those with multiple units or regular maintenance needs.
- Single Unit Repair Discount: Customers repairing a single pressure washer receive a 10% discount on labor if the repair cost exceeds KES 5,000.
- Multiple Unit Discount: Customers with 2 or more pressure washers serviced at the same time receive a 15% discount on total labor costs.
- Maintenance Contracts: Businesses with 5 or more pressure washers can sign up for annual maintenance contracts. These include quarterly inspections, priority service, and discounted parts, reducing overall maintenance costs by 20-30% compared to ad-hoc repairs.
- Commercial Client Discounts: Hotels, car wash businesses, and cleaning companies receive customized pricing based on their specific needs and usage patterns. Bulk discounts apply to both repairs and spare parts.
- Referral Discount: Customers who refer new clients receive a KES 1,000 discount on their next service or repair.
- Loyalty Discount: Repeat customers enjoy a 5-10% discount on subsequent repairs after their third service with Washing Machine Service.
How to Book Pressure Washer Repair and Maintenance
Booking a repair or maintenance service with Washing Machine Service is straightforward and convenient. Customers can choose from multiple contact methods to schedule an appointment at their preferred time.
- Phone Call: Call 0704843613 to speak directly with a customer service representative. Provide details about the pressure washer brand, model, and symptoms for an initial diagnosis and quote.
- WhatsApp: Send a message to 0704843613 with a description of the issue and photos or videos if possible. This allows technicians to assess the problem before arriving on-site.
- Website: Visit washingmachinerepairinnairobi.co.ke to fill out the service request form. Include details about the pressure washer and the problem for a callback within 24 hours.
- Email: Send an email to the address listed on the website with your name, contact information, location, and pressure washer details. A representative will respond with a quote and available service slots.
- Walk-In: Visit the service center in Nairobi for immediate assistance. Technicians can provide on-the-spot diagnostics and repairs for portable pressure washers.
Once the service is booked, a technician will confirm the appointment time and provide an estimated cost range based on the initial description. For complex issues, a detailed quote is provided after on-site diagnostics. Customers are not obligated to proceed with the repair if the quote exceeds their budget.
Payment and Warranty Information
Washing Machine Service accepts various payment methods for convenience. All repairs and maintenance services come with a warranty to ensure customer satisfaction.
- Payment Methods: Cash, Mobile Money (M-Pesa), Bank Transfer, or Credit/Debit Card. Payment is due upon completion of the service.
- Warranty on Repairs: All repairs include a 3-month warranty on labor and parts. This covers any defects in workmanship or parts failure under normal use.
- Warranty on Parts: New spare parts come with a manufacturer's warranty, typically 6-12 months, depending on the part and brand.
- Warranty Claims: To claim warranty service, customers must present the original receipt and contact Washing Machine Service within the warranty period. Technicians will inspect the issue and perform necessary repairs at no additional cost if the fault is covered under warranty.
- Exclusions: Warranty does not cover damage caused by improper use, lack of maintenance, or unauthorized repairs. Normal wear and tear on consumable parts like nozzles, hoses, and seals may also be excluded after a certain period.
Contact Information
For all pressure washer repair and maintenance needs in Nairobi, contact Washing Machine Service:
- Phone: 0704843613
- Website: washingmachinerepairinnairobi.co.ke
- Service Areas: Nairobi and surrounding areas including Karen, Langata, Westlands, Parklands, Eastleigh, Embakasi, and Industrial Area.
- Operating Hours: Monday to Saturday, 8:00 AM - 6:00 PM. Emergency services available outside these hours at an additional cost.