Zanussi Washing Machine Error Codes - Meanings and Solutions

Zanussi washing machines are owned by Electrolux and share manufacturing platforms and control systems with AEG and Electrolux-branded models. Understanding Zanussi washing machine error codes helps you resolve common faults efficiently.

Why Zanussi Washing Machine Error Codes Matter

The E-code system used on Zanussi washers applies equally to equivalent AEG and Electrolux models, meaning the same troubleshooting logic works across all three brands.

Common Zanussi Washing Machine Error Codes

E10 – Water Fill Fault. The washer isn't filling or is taking too long to fill. Solution: Confirm the tap is fully open, straighten the inlet hose, and clean the mesh filter inside the inlet port.

E11 – Slow or Incomplete Fill. A partially blocked inlet filter is reducing water flow. Solution: Clean the inlet filter thoroughly and check household water pressure.

E13 – Water Leakage Detected. The washer has detected water where it shouldn't be. Solution: Inspect hoses, seals, and connections for visible leaks.

E20 – Drain Error. The washer cannot drain the tub. Solution: Check the drain hose for bends or blockages.

E21 – Slow Drain. The washer is draining, but taking longer than expected. Solution: Clean the pump filter thoroughly and check for partial kinks in the drain hose.

E23 – Drain Pump Fault. The drain pump motor has failed. Solution: Test the pump for continuity; a failed motor typically needs professional replacement.

E35 – Water Level Too High. The washer is overfilling. Solution: Professional inspection of the inlet valve and pressure switch is recommended.

E40 – Door Fault. The door is either open or not properly closed. Solution: Check that the door is fully shut and the interlock mechanism engages correctly.

E51 – Motor Power Triac Short Circuit. A fault in the motor's control component. Solution: Professional testing of the motor control circuit is required.

E61 / E62 – Heating Fault. Incorrect or excessive heat detected during the wash. Solution: Professional inspection of the heating element and its relay is needed.

When to Call a Professional

Water fill (E10, E11) and door (E40) faults are usually manageable through basic checks. Drain pump (E23), motor (E51), and heating faults (E61, E62) generally require a technician equipped to test internal electronics safely.