Description: Is your washing machine starting then stopping immediately? Discover quick fixes, causes, and step-by-step solutions. Call or WhatsApp 0704843613 for fast repair.

If your washing machine starts and then stops right away, it’s usually caused by power issues, water supply problems, faulty sensors, or internal component failures. The good news is that many of these issues can be fixed quickly.

 Common Causes & Fixes

1. Power Supply Issues

• Loose plug or faulty socket
• Voltage fluctuations
  Fix: Ensure the machine is properly plugged in and try another socket.

2. Door/Lid Not Properly Closed

• Washer won’t run if the door isn’t locked
  Fix: Firmly close the door until you hear a click.

3. Water Supply Problem

• No water entering the machine
  Fix: Check taps, hoses, and water pressure.

4. Overloading or Unbalanced Load

• Machine stops to prevent damage
  Fix: Reduce load or rearrange clothes evenly.

5. Faulty Door Lock Switch

• Machine thinks the door is open
  Fix: Requires inspection or replacement.

6. Control Board or Timer Fault

• Program stops midway
  Fix: Reset the machine or call a technician.

7. Drainage Issues

• Blocked filter or pump
  Fix: Clean the drain filter and hose.

Detailed Troubleshooting Steps

Step 1: Check Power Connection

• Confirm the power cable is secure
• Try a different wall socket
• Avoid using extension cables

👉 If the machine powers on but stops, the issue may be internal.

Step 2: Inspect the Door/Lid Switch

• Open and close the door properly
• Listen for a locking sound
• If no click, the switch may be faulty

👉 A faulty lock prevents the cycle from continuing.

Step 3: Confirm Water Supply

• Ensure water taps are fully open
• Check inlet hoses for bends or blockages
• Clean inlet filters if clogged

👉 No water = machine starts then stops immediately.

Step 4: Reduce Load Size

• Remove excess clothes
• Distribute laundry evenly

👉 Overloading causes automatic shutdown for safety.

Step 5: Clean the Drain System

• Open and clean the drain filter
• Inspect the drain hose for blockages

👉 Poor drainage interrupts the wash cycle.

Step 6: Reset the Washing Machine

• Turn off and unplug for 5–10 minutes
• Plug back and restart

👉 This clears minor electronic glitches.

Step 7: Check for Error Codes

• Look for blinking lights or codes on display
• Refer to your machine manual

👉 Error codes help identify the exact problem.

Step 8: Inspect Internal Components

If the problem persists, it could be:

• Faulty control board
• Damaged motor
• Broken pressure switch

👉 These require professional repair.

When to Call a Technician

Call a professional if:

• The machine stops every cycle
• You hear unusual noises
• It won’t spin or fill with water
• Resetting doesn’t work

Preventive Tips

• Avoid overloading the machine
• Clean filters regularly
• Use correct detergent amounts
• Service your washer periodically

Conclusion

A washing machine that starts and stops immediately is often caused by simple issues like power, water supply, or load imbalance—but it can also signal deeper mechanical faults. Early diagnosis helps prevent costly repairs.

Need Fast Washing Machine Repair?

Don’t let laundry delays stress you out. Refitec offers quick, reliable washing machine repair services.

👉 Call or WhatsApp Refitec on 0704843613 today for expert assistance!